| Assy, DSR Pin & Box Mandrel- Set- XT39 Complete with Cutters, Spare Face Plates, Pre-cut Discs and Case. | tubularip.com | 14897 USD | — | — |
| Coil, 8 1/2" Buggy (Truspect) | tubularip.com | 1675 USD | — | — |
| Gage, Coupling Alignment CA-9001 | tubularip.com | 1352 USD | — | — |
| Gage, LG-6002-1 Internal/External 2-pt Lead Gage, ½" - 4" thread lead lengths, .193" contact point spacing, .0001" res. indicator | tubularip.com | 1326 USD | — | — |
| Coil, Magnaflux L-10 | tubularip.com | 1215.5 USD | — | — |
| Powder, 20B- 30# Bucket | tubularip.com | 1155 USD | — | — |
| Board, Circuit- Mux Encoder | tubularip.com | 1120 USD | — | — |
| Powder, Magnaflux 7C Black 25lb. Container | tubularip.com | 1062.73 USD | — | — |
| Gearbox, R/H- ALL UNITS With 3/4 HP or 1 HP Motors (Dodge) | tubularip.com | 1013.15 USD | — | — |
| Motor, Buggy Drive- High Torque | tubularip.com | 967.61 USD | — | — |
| Yoke, Magnaflux Y-2 | tubularip.com | 824.05 USD | — | — |
| Motor, Buggy Drive- High Speed | tubularip.com | 656.88 USD | — | — |
| Mandrel, Box NC70 | tubularip.com | 575 USD | — | — |
| Gage, Profile - TP15-XTF - XTF Connections All 24-69, uXT Connections All, uXT57 Xmark, uXT69 Xmark and XTF 57 Xmark | tubularip.com | 498.75 USD | — | — |
| Gage, TH-3000-RSC-1 Ext Thread Hght, 0-10-0, Tool Joint , .50"/.0001" Res. Indicator, 2358 | tubularip.com | 467 USD | — | — |
| Set, IT-6000-6RA - Replacement Arm 6" Length | tubularip.com | 457 USD | — | — |
| Gage, Groove Width Go/No-Go GW-1003 | tubularip.com | 432 USD | — | — |
| Gage, Groove Width Go/No-Go GW-1004 | tubularip.com | 432 USD | — | — |
| Powder, Ancolor- White- 100 lb. | tubularip.com | 375 USD | — | — |
| Drift, Casing - 8 5/8"- 32.0# - 6" (ALTERNATE) 7.875 O.D. | tubularip.com | 361.26 USD | — | — |
| Valve, Hyd-SS- Cylinder HYD DIR VALVE SOLENOID PARKER VALVE W/PLUG-IN COIL 110VAC , Override with Boot, W/Light | tubularip.com | 359.5 USD | — | — |
| Drift, Pipe - 2 7/8" 7.90# 24" Long End Drift 2.229 O.D. W/eyebolt | tubularip.com | 333.46 USD | — | — |
| Gage, 5 7/8"- OD W/Standard W/Case | tubularip.com | 329 USD | — | — |
| Gage, 6 5/8"- OD W/Standard w/Case | tubularip.com | 329 USD | — | — |
| MOTOR, 16391 - 101-2435-009 CHARLYNN LOW SPEED | tubularip.com | 305.86 USD | — | — |
| Gage, 4 3/4"- OD W/Standard w/Case | tubularip.com | 304.75 USD | — | — |
| Powder, Ancolor- Gray- 100 lb. | tubularip.com | 300 USD | — | — |
| Gage, 4"- OD W/Standard W/Case | tubularip.com | 299 USD | — | — |
| Gage, 3 1/2"- OD W/Standard W/Case | tubularip.com | 299 USD | — | — |
| Gage, 2 7/8"- OD W/Standard W/Case | tubularip.com | 299 USD | — | — |
| Gage, 4 1/2"- OD W/Standard W/Case | tubularip.com | 299 USD | — | — |
| Gage, 2 3/8"- OD W/Standard W/Case | tubularip.com | 299 USD | — | — |
| MOTOR, 16392 - 101-1501-009 CHARLYNN HIGH SPEED | tubularip.com | 274.05 USD | — | — |
| MOTOR, 101-1100-009 CHARLYNN Hydraulic (For cleaning machine drives) | tubularip.com | 274.05 USD | — | — |
| Drift, Casing - 6" 24.5# 5.075 O.D. x 6" long | tubularip.com | 273.86 USD | — | — |
| Gage, Plug- 2 3/8" EUE | tubularip.com | 253.1 USD | — | — |
| Gage, Profile - PG-6P-2STEP , PH6 Thread from PMC Lonestar W/Cert of Compliance | tubularip.com | 220.5 USD | — | — |
| PUNCH, DS47 INNER PAPER | tubularip.com | 215 USD | — | — |
| DS46 INNER PAPER PUNCH | tubularip.com | 215 USD | — | — |
| Plate, AH 4 3/4" - 5700/ 6000 | tubularip.com | 210 USD | — | — |